We are about to sail across the Atlantic and I'm looking for the supplier of the Arctic rations/ freeze dried. Can you tell me the company's name?

During this year, we will be opening our new armouring facilities in the U.A.E. And that is the reason why we are interested in getting a new supplier for this region. We will be armouring in this facilities light armoured vehicles from B5 till B7..
I would really appreciate it if you send me a complete quotation, of your products with prices and specs as well as the delivery timing for supplying.

We have a NEW gun cleaner you may be interested in learning more about and purchasing:
1.) It is made entirely from plants (no water and no petroleum).
2.) Contains no hazardous chemicals.
3.) Cleans carbon faster than any other cleaner because it breaks the carbon molecules apart. It gets into hard to reach areas and the carbon just comes off without scrubbing. It leaves a slippery coating for protection and lubrication so there is no need to re-oil the weapon after cleaning. Plus the slippery coating keeps the weapon from picking up loose sand and dirt. This is a real plus for anyone working in a dusty environment.
4.) Washes off with soap and water.
5.) Because it works faster than traditional cleaners it requires less material to clean the weapon. Some field reports indicate using only ¼ the usual amount required from other cleaners.
6.) It doesn’t break-down in extreme heat and it doesn’t freeze. If it is left in the liquid form on a gun and it gets extremely cold it turns to a light grease. But it is still providing lubrication and protection for the weapon. In most cases it is left on the weapon with a thin coating which isn’t affected by cold or hot temperatures.
7.) Doesn’t irritate your skin like most water based or petroleum based formulas.
8.) According to our chemist, it will provide longer barrel life in weapons like the 50 caliber machine gun because it lubricates the barrel and reduces the friction and carbon buildup.
9.) Doesn’t enter the bloodstream through the skin and helps protect the bloodstream from hazardous chemicals removed from the weapon.
10.) It can be used on the inside and outside of the weapon.
11.) One field report told about a weapon getting sluggish after 150 rounds when it was cleaned with petroleum or water based cleaners. Then they tried it to clean the weapon and it was still firing smoothly after 500 rounds. The operator said “weapons just don’t pickup as much carbon when we use it”.
12.) It replaces water when cleaning.

I am looking for a supplier of Camouflaged water/food containers

we need ballistic blankets for Nissan Y61 and D22, as we sell cars to Africa/Iran/Afghanistan

Need to purchase amour facing plate for building in high velocity storm area. ie, high speed wind driven projectials.

I'm responsible for the management of all Harrow Borough's Cemeteries. Do you have a supplier that provides temporary tracking across poor terrian?? I have diggers and dumpers that are continually damaging the ground. Any assistance would be great. Thank you.

We are interested to contact suppliers of mobile field medical operation units, deployed in containers. Your assistance on the matter shall be greatly appreciated

we would be most grateful to have your best proposal for a mobile transmission outside broadcast truck using mobile links (type Gigawave).



The truck should be fitted with:



(1) Socket plug for 240 V / 50 Hz mains supply regulator

(2) Air conditioner

(3) ONE video distribution amplifier

(4) TWO audio distribution amplifier

(5) Audio and Video patch panels sung XLR (inputs / outputs) for audio and BNC plugs and sockets

(6) Hydraulic mast

(7) Mains distribution from breaker on 13 amps sockets

(8) Audio monitoring amplifier + loud speakers

(9) Racks to hold 14 inches off air receiver – monitor. Transmission and receiver controls (19 inches racks)

(10) Oscilloscope

We are looking for suitable partnership to develop a landing gear system for an unmanned space return vehicle, with a lift of mass of about 1.5 tonnes.

Items required

1. Anti-riot Helmet – 28000pcs

Material: ABS, robust and resistant to all solvents, stone throwing and resistant to smashing by batons. The face cover should be made of clear polycarbonate, permitting a gas mask to be used if necessary, it should be hinged to the helmet, so can be lifted if necessary. Approx weight to be 1.5kgs

2. Anti riot shield- 28000pcs

Material: Polycarbonate transparent and resistant to all solvents. It should be rectangular, with reinforcement. Size to be 900x550mm x thickness 3.5mm. The shield should protect against any projectiles etc. It should be marked “POLICE” in fluorescent blue. Approx weight to be 2kgs

3. Batons – 28000pcs

The batons should be cylindrical with a leather handle and side for fixation in triangle. The size is 60-70mm in length and diameter of 25-30mm with weight of 500g

4. Sheath cover for the batons – 28000pcs

To be in leather resistant to abrasion, double rivets, steel end in black weight about 10g

5. Handcuffs – 28000pcs

Stainless steel handcuffs with 2 keys

6. Plastic handcuffs for only single use – 9000pcs

7. Leg protection in plastic – 28000pairs

8. Arm protection in plastic weight about 500g – 28000pairs

9. Abdomen protection to absorb shocks and vibrations – 28000pcs

10. Gas mask black in colour with weight apprx. 500g and replaceable gas filters. – 9000pcs

We are interested to contact suppliers of mobile field medical operation units, deployed in containers. Your assistance on the matter shall be greatly appreciated

Could you please supply a quote for the following item. The ROM is 100 units. Conform to Def Stan 8141 Level J.

Aluminium or Heavy duty plastic container, Stackable and green in colour. With a hinged lid and catches that can be padlocked. Fold flat or retractable handles at each end. Roller wheels on one end. High density foam insert cut to accept specific equipment (weight 31 kg and oil resistant). Have internal dimensions of:
Length 105 cm
Width 35 cm
Height 45 cm

We are interested in aluminium cases for carrying up to 90 Grenade accessories, with very small charge levels. The initial order is likely to be about 600, split between two sizes, and a subsequent volume of about 2,500. Could I urgently have info on sizes and prices. These will form part of a turnkey explosives solution we have designed for a major overseas client. We are meeting tomorrow and a reply today would be very useful.

I,m looking for 1500 pieces of Dell notebooks.

********, told me that he would be the person, who could help me.

Product name is Dell 510M

Also I,m looking for a large amount of new retail CRT monitors.

One of our customer is looking for 2800 batons with side handle with the following characteristics
Long: 24"
Diameter: 1 1/4"
Color: Black
Material: Could be Nylon, PVC, Poly-resin, Policarbonate ( The price is an important factor of decision, my customer wants to buy the cheapest option)

3.- Other customer is looking for 60 Gas Mask and 60 filter for CS gas.

Could you please to quote the batons, Gas Mask and filters?

I am trying to find an inflatable roof for a sports area. It has mesh fencing round the edge to a height of approx 2.4m and is approx 30m X 50m. Can you help?

we have a customer who has been appointed by the MOD to do some work on a fabric like material called Hypalon which will go on hand grenades. I have been asked to source this material. Price / Size and availability - Pls advise ASAP, and send samples if you have.

PROVIDE PRICING FOR PREMIA 75 MEGA SERIES MODEL H7 PUMP.

We require 100 units of inflatable boats with a rigid hull, to seat roughly 8-12 people, to be operated with outboard engines to be bought separately.
these boats will be used by a river police in an African country.

Please let us know if you can source and supply this.

6" dia 15 m long ASA 150 R/F flanges-4pcs
do 10 m 4 pcs
4" dia 15 m 4 pcs with JIS 16 k flange
21/2" dia 15 m with ASA 150 R/F 4 pcs
21/2" male/female 8tps BPST couplingfor following lengths and numbers
1 m*2pcs
3 m*4 pcs
10 m*3 pcs
20 m*3 pcs
also dry disconnect coupler 4 each on male,female'and ASA flanges -21/2" dia

I require to order approx. 200m.

We are looking for permanently installed dosing equipment to handle low hazard biocides . Unit dose being 15 litres from bulk held in IBC. Do you have anything that might fit the bill?

IAM LOOKING FOR BATTERIES TLP296K IEC623 50NO KINDLY QUOTE YOUR BEST CIF PRICE TO BAHRAIN

In reference to the above subject kindly inform if you can manufacture/assemble a mobile hospital with the following description

MOBILE MILITARY HOSPITAL

1. NURSING STAFF:130 PEOPLE

2. 100-150 BEDS PATIENTS CAPACITY

3. TO BE ABLE TO PERFORM 30 MAJOR SURGERIES PER DAY

4. TO BE ABLE TO ASSEMBLE {SET IT UP} IN 18 HOURS MAXIMUM IN SPACE NOT BIGGER THAN 6.000 sq meters {ABOUT ¼ OF AN ACRE}

5. TO BE ABLE TO PERFORM TEMPORARY SURGICAL INTERVENTIONS IN 4 HOURS AND TO BE FULLY OPERATIONAL IN 18 HOURS

6. TO BE ABLE TO DISASSEMBLE AND BE MOBILE IN 6 HOURS MAXIMUM BY ROAD OR BY AIR WITH C 130 AIRCRAFT OR CHINOOK HELICOPTER

7. RPX CAPABILITIES {FULL CHEMICAL & BIOLOGICAL PROTECTION}

8. TO WITHSTAND EXTREME WEATHER CONDITIONS

9. PROTECTION AGAINST LIGHTNING

10. AUTONOMY FOR EACH CONTAINER FOR THE FOLLOWING: ALL AVAILABLE COMMUNICATIONS{TELEPHONE, FAX, E MAIL etc} POWER WITH GENERATOR, WATER AND SEWAGE

11. TWO COLLAPSIBLE WATER TANKS 10 CUBIC METERS WITH CHLORINATION CAPABILITY AND SUPPLY CAPABILITIES 20 CUBIC METERS PER DAY

12. 12 PLATFORM LORRIES TO CARRY THE CONTAINERS WITH AUTONOMY 500 kms AND CLIMBING CAPABILITY 30%

13. 20 WASHING BASINS AND 20 WC

14. REFRIGERATING MAINTENANCE CHAMBER 240 CUBIC FEET CAPACITY{

15. OPERATING THEATRE FOR GENERAL AND THORACIC SURGERY: TWO TABLES. ALSO EXPAND CAPABILITIES

16. OPERATING THEATRE FOR ORTHOPEDIC SURGERY: ONE TABLE. ALSO EXPAND CAPABILITIES

17. INTENSIVE CARE UNIT FOR FOUR BEDS CAPACITY. ALSO EXPAND CAPABILITIES

18. X-RAY LABORATORY

19. MICROBIOLOGIC LABORATORY

20. PHARMACY

21. 17 ARMY TENTS LIGHT TYPE 80-85 sq METERS and 3 of 38-40 sq meters{OLIVE BROWN COLOR}

22. 7 ARMY TENTS LIGHT TYPE WITH 5x8 METERS FLOORS

I am looking to source Aluminium Hollow Tubes with a minimum wall thickness of 6.3mm for a project we are currently working on, is this something you could supply?

Dear Sir,
RE Chain Slings
Appreciate your quote on the following:

a] 2 legs, 1.5T, 7mm X 1M, pt. no. CN1129 , 6pcs
b] 4 legs, 3.15T, 10mm X 3M , pt. no. CN1130, 4 pcs
c] 4 legs, 5.3T, 13mm X 4 M, pt. no. CN1131, 2 pcs
d] 2 legs, 5.3T, 13mm X 4M, pt. no. CN1131, 2 pcs
inclusive of master link & hook

Please note that we have a new inquiry for the following:

1- SIGNAL GENERATOR MODEL 52018-910P ( mentioned in your price list) ,Qty: 2.

2- GPIB MODULE , part no 54433-001U ,Qty: 2.

3- SERVICE MANUAL H25018-910P part no. 46881-512Z, Qty: 1.

4- MAINTENANCE KIT ,part no. 54711-033E ,Qty: 2.

Could you please help us for a quotation.

I am interested in sourcing sea water activated batteries and would like
information on the range of models with sizes weight and volume that can
fit in a tube under 100mm dia.and less than 200mm length.

I need Qty 100 of the ICGA 15008 for a Scimitar H radio

We need a quantity of NATO stannag 2996 monotone green paint. This must have a matt finish - suitable for NATO vehicles.

10 sets of:
- ejection seat parachutes, chute no. MBEU 11282 PA
- with harness and head box
- for lockheed martin mark 10 LP seat
- with 10 year shelf life or 5 years in seat life
- required urgently

I am after an APU turbine (suitable for conversion to thrust producing (about 100lbs+) do you have anything suitable can be used as long as in working order

First of all thank you for your quick response. One of our customers wants to buy ladders for using at aircraft hijack intervention operations. (The upper tip of ladder shall be with sucker-for sticking on the aircraft body or door- and lower tip of ladder shall include rubber to prevent slipping).

Many thanks for your earlier call.As just discussed, details as below:
1. Raytheon GPS model 631 complete with 10 meters long interconnecting cable, installation material, standard spare parts, service manual & spare parts book for the same qty 1 set
2. Cartridge having ******************* Coastal Area qty 1
3. Skipper navigation echo sounder type GDS 101 complete with 50Hz transducer assembly 20 meters long, installation material, operation hand book and standard spare parts book qty 1
4. Suitable depth indicator type IR 201 qty 1

Marine assorted spares:

1. Exhaust rubber bellows connecting engine exhaust to fibreglass on hull size 24 inches long X 16.5 inches width qty 1
2. Armature CAV 24V 6211-144C qty 2
3. Solenoid CAV 24V  6211-517 qty 1
4. Pinion CAV  6211-375F qty 2
5. Starter kit CAV 6010-21H qty 2
6. Relay CAV 24V 6211-651 qty 4
7. Phenolic rubbercutless bearing 2 3/4 X 3 1/2 X 11 ODXIDXL qty 6
8. Phenolic rubber cutless bearing 105X138X420 MM IDXODXL qty 2
9. Phenolic rubber cutless bearing 105X138X210 MM IDXODXL qty 4
10. Element perkins LO cooler 24866275 for Perkins 6.3544 TW33344U626486J qty 1
11. Starter Motor assy Johnson OBM 149KW PN 0586411 qty 2
12. Pipe Oil 1 PN 6TA-13416-00 for Yamaha Diesel Model ME420ST1-P1 Ser 820419 820420 qty 2
13. Furuno Radar 1833C, 10.4 inch coloured LCD display, 640x480 pixel output, range 0.125-36NM range
14. 602mm scanner antenna Radiator Randome type, 4KW, power supply 12 -24 VDC, max 70W, comprising of: display unit green phosphor LCD 481x640 pixels
15. MJB24LPF0005-150 , 20 Meters Antenna Cable, C/W Standard Spare parts & installation materials.

We are in need of a Tactical Intervention Vehicle with breaking through ladder (built-in) for quotation as per the attachment (please see attached technical details) for this tender project that shall be offer to our Client.

Please quote for the following:
Cleaning compound for aircraft surface S270A-33, MILSPEC MIL-C-85570
Qty: 12 drums x 25 litre. Appreciate your early reply.